Tag: ethernet

Five men seated on red chairs in front of a blue digital backdrop at a conference panel.

How automotive computing will shape the next vehicle generation

SDVs remain an ambition without the right hardware. At AEK 2026, the focus shifted to the computing foundations of the next vehicle generation – from SoCs and chiplets to edge AI, Ethernet and RISC-V, and to the balance between central performance and distributed control.

Dr. Martin Large

Camouflaged SUV driving fast on an open test track at sunset.BMW’s Neue Klasse iX3 introduces a new E/E architecture with four central computers powered by Infineon microcontrollers and Ethernet chips.In 2026, BMW will bring the iX3 to market as the first production model of the Neue Klasse. The vehicle will be manufactured at the new plant in Debrecen, Hungary, designed from the outset for fully electric production.
Technically, the iX3 represents the sixth generation of BMW’s eDrive technology, featuring an 800-volt architecture, high charging performance and extended driving range. However, the most significant transformation lies in the electronics architecture rather than visible design changes.According to BMW, computing power increases by more than twenty times compared with the previous vehicle generation. Hardware and software development are increasingly decoupled, allowing functions to be expanded or modified via over-the-air updates.
At the same time, BMW introduces a zonal wiring architecture. The wiring harness is divided into front, centre, rear and roof zones. This reduces cable length in the iX3 by approximately 600 metres, cutting weight by around 30 per cent. The simplified layout also supports production efficiency and serviceability.
Where are Infineon chips used in the Neue Klasse?
Infineon states that multiple semiconductor components are integrated into the Neue Klasse, including microcontrollers for the central computers and solutions for power distribution.
BMW relies entirely on Infineon microcontrollers for the computing performance of the four superbrains. The driving dynamics computer, known as the “Heart of Joy”, uses the latest-generation Aurix tc4d microcontroller. The other three central computers and the zonal control units are also based on Infineon microcontrollers, including devices from the Aurix and Traveo families.
What makes the “Heart of Joy” technically distinctive?
The “Heart of Joy” centralises control of propulsion, recuperation, braking, steering and stability systems. Functions previously distributed across several control units are now consolidated into a single system.
BMW refers to control cycles in the millisecond range and up to 1,000 interventions per second. The objective is more precise coordination of acceleration, deceleration and stabilisation, particularly during rapid load changes or cornering.
One key benefit concerns energy recuperation. Faster and more precise control enables a larger proportion of braking energy to be recovered electrically. The mechanical braking system primarily acts as a safeguard during normal driving conditions.
At the centre of this system operates the Infineon Aurix tc4d, a safety-oriented automotive microcontroller designed for demanding real-time applications.
What role does Automotive Ethernet play?
Centralisation increases the need for high-performance internal data communication. Advanced driver assistance sensors, cameras and radar systems generate large volumes of data that must be processed in real time.
BMW adopts Automotive Ethernet to meet these requirements. Infineon supplies components from its Brightlane family, including transceivers and switch solutions. These ensure high bandwidth and low-latency data transmission within the vehicle’s E/E architecture.
Compared with traditional bus systems, Ethernet offers higher data rates and more flexible network topologies. Deterministic communication, meaning guaranteed timing behaviour, is particularly critical for automated driving functions.
How is power distribution digitally controlled?
Infineon semiconductors are also used in energy distribution. Instead of numerous conventional melting fuses, BMW deploys electronic fuses, known as eFuses.
Components from the Infineon Profet Wire Guard family can replace up to 150 traditional fuses. These digital fuses monitor current, detect overload conditions and can be selectively switched. Unlike mechanical fuses, they provide diagnostic data and can be reset after shutdown.
Depending on operating mode – driving, parking or charging – individual loads can be automatically deactivated. BMW reports an efficiency gain of approximately 20 per cent. Optireg power management integrated circuits further stabilise voltage supply within the E/E architecture.
What role does OS X play in the Neue Klasse?
For the first time, BMW introduces its new operating system, OS X, on the four central computers. It is based on an Android Open Source Project stack and forms the software foundation of the Neue Klasse.
This enables features such as the “Panoramic iDrive”, a wide display band positioned below the windscreen. The user interface is software-driven and can be continuously developed through updates.
BMW emphasises long-term software continuity across model generations. Such continuity is significantly easier to implement within a centralised computing architecture than in highly distributed systems.
Are only Infineon chips used in the Neue Klasse?
No. While Infineon plays a central role in the new E/E architecture, modern electric vehicles integrate hundreds or even thousands of semiconductor components.
These include chips for:
• Power electronics of the electric drivetrain
• Battery management systems
• Radar, camera and ultrasonic sensors
• Connectivity modules
• Displays, graphics processors and memory
• Comfort and body electronics
BMW does not disclose all semiconductor suppliers. Industry practice typically involves collaboration between multiple semiconductor manufacturers and Tier 1 suppliers.

These Infineon chips power BMW’s Neue Klasse

With the iX3, BMW launches the Neue Klasse and a new E/E architecture. Four central computers consolidate vehicle functions, powered by Infineon Aurix microcontrollers, Ethernet components and digital fuses.

Dr. Martin Large

Infineon and HL Klemove deepen SDV cooperation

Infineon and HL Klemove are expanding their partnership to accelerate software-defined vehicle architectures. Joint work on zonal electronics, radar and in-vehicle networking aims to support next-generation automated driving platforms.

Diemut Baldauf

Optical Multi-Gigabit Ethernet: ZF relies on fibre optics

For extreme data rates in vehicle communication, ZF has further developed its high-performance computer ProAI for optical multi-gigabit Ethernet. The German supplier sees this as a key technology and announces series production from 2026.

Dr. Martin Large

Tag: ethernet

­­ Tag: ethernet

ethernet

How automotive computing will shape the next vehicle generation

These Infineon chips power BMW’s Neue Klasse

Infineon and HL Klemove deepen SDV cooperation

Optical Multi-Gigabit Ethernet: ZF relies on fibre optics

Tag: ethernet